Monday, December 23rd, 2024
What we know is that water in the most vital element for survival, although it’s estimated that 15% percent of the worlds population doesn’t have access to clean drinking water. This becomes a vital human condition as water on a daily basis is needed for living.
As a result, there are countless deaths in undeveloped countries and it’s not from war, famine, or disaster, but from water related diseases. One method of purifying water is exposure to direct sunlight, but this process of natural disinfection can take up to 48 hours.
So research continues to find easier more effective methods to disinfecting water for human absorption, ways which are more common, sensible, and quicker.
Best Options For Pure Safe Drinking Water
Without a doubt, pure water that’s completely safe to drink is becoming an increasingly difficult commodity to find, this even in developed nations.
For many, this regardless of where one lives, purifying the water tap has now become more of a necessity than an option.
This also doesn’t mean resorting to costly bottled water from the local supermarket. It’s found that most bottled water is usually nothing more than common tap water with additional filtration, as most federal testing requirements remain lax.
Pure Sources Of Water
The best alternate to common tap water, which obviously isn’t available for those living in urban areas, is gravity fed natural raw spring water. These sources needs to be monitored for contamination by the local municipalities however.
Natural spring water or “living water” is organically pure as it’s filtered by the earth, and considered the healthiest water on the planet, this similar to how raw food is considered living food.
Another safe water supply source is well water, this provided that it’s located at least 900 feet below the surface of the ground. If not, then this common water supply may of been contaminated somehow.
The reason being that toxic substances which has been continuously dumped into the soil for decades, leaks in. There are also fertilizers such as nitrogen along with poisonous chemicals, which are dumped into the local soil on a constant basis.
Removing Toxins Out Of The Drinking Water
It’s believed that water filtration for bathing and showering, is just as important as filtering the drinking water from the kitchen tap.
The reason being that the damage that’s incurred through the skin and lungs from breathing the water fumes in, can surpass the damage that’s done by just drinking the water.
So the best solution is to remove these harsh toxins and chemicals entirely from the home’s water supply, this by installing a whole house water filtration system. What doing so will protect your body along with your appliances.
Since there’s usually just the one water line that’s coming into the home, placing a good filtration system at that point of access is the easiest solution, which ensures that the water and air quality in the household is as pure as possible.
Source Of The Water Supply
Keep in mind that you’re getting your drinking water from a common municipal supply, which hasn’t most likely been upgraded for decades.
So what results is the rapid deterioration of the indoor air quality, this especially during the winter once the windows are closed shut.
This is when chlorine and other toxins can evaporate directly into the local indoor environment from the toilet bowls, baths, showers, taps, washing machine, and dishwasher.
The Best Type Of Water Filtration
The most effective whole house filtration system should meet a few criteria. A system which utilizes at least 60 pounds of filter media, along with the capability of producing at least eight or more gallons of water per minute.
If you happen to be running water at two different showers, the kitchen sink tap, and the dishwasher all at the same time, is when you’ll realize why these minimum levels of water supply becomes important.
This recommendation is for a house or condo up to 3200 square feet, which equates to a residence with approximately three and a half bathrooms. If the living space is larger than that, then two water filtration systems may be needed.
How To Instantly Make Your Drinking Water Disinfectant
There is a method of purifying your drinking water immediately, a simple solution by using everyday common ingredients. What researchers have discover is it can be as simple as lime juice.
Begin by adding pure lime juice or a lime slurry into the water that is suspect of contamination by various toxins, bacteria, chemicals, and viruses. The method is exposing the lime infused water to sunlight.
After testing this simple process, what occurred was that the levels of both E. coli and MS2 bacteriophage viruses were significantly reduced, this when compared to standard methods such as using solar (sun) disinfection.
Adding Lime Citrus To Water
The preliminary results showed that solar disinfection combined with lime citrus can potentially reduce toxin levels in the water in as short as 30 minutes, a treatment time similar to boiling water and other water treatment solutions.
All that’s required is 30 milliliters of lime juice for every 2 liters of water that’s needed for disinfection, a quantity that’s extremely affordable while not producing an unpleasant or distinct taste.
Limes are also now readily available at all times during the year, along with adequate sunlight, this especially in those countries which doesn’t have access to clean drinking water.
At home, it’s not surprising to learn that the drinking water from the tap may be contaminated, this regardless of which purity measures are used.
The modern filtration processes which are currently used creates their own set of issues, so why not try the simple solution of adding lime to your drinking water then exposing it to sunlight.